Pay in 4 interest-free payments of $10.00 Learn more
Ships within 48 hours · Estimated delivery Oct 14 - Oct 19
Long shank design suited for use in tapping machines and production tapping
Zero or Set a Tolerance Band - Press ZERO or set go/no-go limits before measuring
Covers a 2mm to 30mm cutting diameter range for both fine detail cuts and full-depth sheet cutting
Position the Gauge on the Weld - Place the appropriate edge against the weld bead or joint
Available in two dimensioned sizes (15x11x2x64mm and 15x11x2x65mm) plus a Yellow-coded G32-76 spring
Imported Mold/Die Ejector Pin UAE Collet Nut Long shank design suited forFeatures Imported Mold Die Ejector Pins are ground precision steel pins used in injection mold and press die tooling to push the finished molded or formed part out of the tool cavity once the cycle is complete. Sized by diameter x length (mm) across nine standard combinations from 2mm to 25mm diameter and 100mm to 600mm length, these pins are manufactured to a consistent diameter and straightness for smooth, repeatable ejection strokes. Hardened and
US$ 52.00
US$ 50.95
US$ 33.00
US$ 62.95
US$ 36.99
US$ 44.50
US$ 63.00